Restoring Objects to Qsys

On a V4R5 model 170 I was getting some damaged objects and replaced a
disk drive that was failing.

I've restored the damaged objects from the user libraries but I'm
hesitant to restore the few objects in Qsys. I found out these objects
were damaged when I did an option 21 save after replacing the disk.

The save process told me about the damage qsys objects and a help
message mentioned something about that the tape should not be used to
restore the operating system. Lovely.

The damaged object are:
SRVPGM  QKRBGSS
FILE QDPDD1P  (a display format for problem analysis)
PGM QUTCOADP

I found an older Savsys tape which had only the service program on it.
I'm assuming the others may have been damaged and not saved the previous
time.

Can I just use RSTOBJ for the service program and what would be the
proper snytax of command as I notice the library name and file name on
the tape are not the same.

Also, for the two QSYS objects which are not on the tape, can I get them
from another V4R5 box using SAVOBJ

Thanks

Steve Moland
Access Paths Inc
12 Parmenter Rd Unit C4
Londonderry NH 03053
603 845-0190 Ext 2
steve@xxxxxxxxxxx