RE: Load Source

Finally got it mirrored.  

Thanks for the assistance Pat.

Douglas
 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pat Barber
Sent: Wednesday, January 17, 2007 9:14 AM
To: Midrange Systems Technical Discussion
Subject: Re: Load Source

According to the book, you should be able to do this:

Because mirrored protection is configured by disk pool, you can mirror one,
some, or all disk pools on the system. By default, every system has a system
disk pool. It is not necessary to create user disk pools in order to use
mirrored protection. Although mirrored protection is configured by disk
pool, all disk pools must be mirrored to provide for maximum system
availability. If a disk unit fails in a disk pool that is not mirrored, the
system cannot be used until the disk unit is repaired or replaced.

You can specify which drive to which drive in DST.


The Add Disk Unit and New Disk Pool wizards guide you through the process of
adding pairs of identical capacity disk units to a protected disk pool.

Douglas W. Palme wrote:

I'm not mirroring 17 to 8, rather I have two 8's and two 17's but it 
still will not allow me to mirror them, unless all four are the exact 
same drives in the asp.

I want to mirror the 17 to the 17 and the 8 to the 8.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.