Re: Load Source

[Pat Barber <mboceanside@xxxxxxxxxxxxxxxx>]

According to the book, you should be able to do this:

Because mirrored protection is configured by disk pool, you can mirror 
one, some, or all disk pools on the system. By default, every system has 
a system disk pool. It is not necessary to create user disk pools in 
order to use mirrored protection. Although mirrored protection is 
configured by disk pool, all disk pools must be mirrored to provide for 
maximum system availability. If a disk unit fails in a disk pool that is 
not mirrored, the system cannot be used until the disk unit is repaired 
or replaced.

You can specify which drive to which drive in DST.


The Add Disk Unit and New Disk Pool wizards guide you through the 
process of adding pairs of identical capacity disk units to a protected 
disk pool.

Douglas W. Palme wrote:
> I'm not mirroring 17 to 8, rather I have two 8's and two 17's but it still
> will not allow me to mirror them, unless all four are the exact same drives
> in the asp.
>
> I want to mirror the 17 to the 17 and the 8 to the 8.