RE: Any idea what Feature card 6506 or 6510 is

Is there are trick to configuring it 
We want to connect this tank to our network but keep getting
a message Vary on failed with reason Code 0000200E 
"Protocol conflict between IOA and line description ETHTCP"
We haven't used this machine in a couple of years and my
recollection was that it was working at one time.
But my memory is not as good as it was two years ago!

When comparing the Controller, Line and Device descriptions
with our 520 (2838 Ethernet Port) it appears to be the same
(obviously with the 520 and V5R3 there are some different
parameters)

Allen

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wayne
McAlpine
Sent: Friday, October 13, 2006 4:46 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Any idea what Feature card 6506 or 6510 is

Feature 6506 is the old FSIOP and 6510 is the 10 mb ethernet
port that 
is part of it.  We have one on our Model 720 but it hasn't
been used in 
years.

Allen wrote:

I have an OLD Model 500 with V4R5

There is a card in it labeled 6506 and the slot next to it
has 6510 stamped on it

The two cards are connected together and only the 6506 has
the blue tabs for removing the card

 

My hardware maintenance guy does not know what 6510 is and
says it is not listed in his IBM book

 

It does have what appears to be an RJ45 jack in it.

 

Any ideas what this card is called?

 

Thanks

 

Allen