× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Talk to your tape unit vendor.

For the iSeries to use the tape unit, it will have to emulate some
standard IBM iSeries tape drive/library.

The IBM and third-party (Cybernetics, eStorage, GST, ect) iSeries
compatible tape devices/libraries are easily shared with
Windows/Linux/ect.  But you are probably out of luck if the device is
from a vendor who asks what's an AS-400/iSeries/i5.

Good luck,

Charles Wilt
--
iSeries Systems Administrator / Developer
Mitsubishi Electric Automotive America
ph: 513-573-4343
fax: 513-398-1121
  

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx 
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of ldwopt@xxxxxxx
Sent: Wednesday, October 11, 2006 2:48 PM
To: Midrange Systems Technical Discussion
Subject: New 520

I just received in a 520 Enterprise system. It consists of 2 
units, a cpu unit and a disk drive unit.   I have found the 
install instructions from IBM to be less than adequate. I 
have most of it figured out I believe but will review before 
turning the power on.

Where can I go to get detailed instructions as to how to hook 
up the cables and which ones do I use?

The HMC was not ordered.. I believe I will need a small PC to 
act as the ops console for initial IPLing of the system. Is 
that still correct?

I have been asked to look at the backup procedures of the 
system. Has anyne backed up the iSeries systems to a 
"collective" tape unit. We have a large tape unit for backing 
up Linix and Windows system. The operations stafgf would like 
to have the iSeries backed up to the same unit.   Any 
suggestions would be appreciated

Thanks in adnvance

Dave Willenborg
FNTS
Omaha NE
-- 
This is the Midrange Systems Technical Discussion 
(MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.