Re: IBM Fax support for iSeries -- MIDRANGE-L

We were running it on our 740 with an SPD multi-line modem card.Support for that went away when we installed V5R3 and we had to buy theexternal modems (7840??) to continue using it.


Peter Levy wrote:

Rob,

I'm very surprised to learn from these responses that 5798FAX can run on V5R4.

When we upgraded from an 830 w/V5R2 to a partitioned 570 w/V5R3 our B.P. told 
us in no uncertain terms that the fax product wasn't going to be supported. We 
had originally purchased it to run on our old 830 intending to migrate from the 
RMTi fax product because that vendor had decided to stop supporting it. In the 
end we had to switch gears and convert to Quadrant's FastFax product instead.

I read earlier in this thread that it's very hardware dependent, so I'd like to 
know what hardware it's supported on?

Pete

----- Original Message -----From: rob@xxxxxxxxxTo: Midrange Systems Technical DiscussionSent: Wednesday, September 06, 2006 9:29 AM

  Subject: Re: IBM Fax support for iSeries

Where do you get this information? I am running 5798FAX on V5R4, fullysupported.


  Rob Berendt

--Group Dekko Services, LLC

  Dept 01.073
  PO Box 2000
  Dock 108
  6928N 400E
  Kendallville, IN 46755
  http://www.dekko.com

"Peter Levy" <plevy@xxxxxxxxxxxx>Sent by: midrange-l-bounces@xxxxxxxxxxxx

  09/05/2006 07:16 PM
  Please respond to
  Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


  To
  "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
  cc

  Subject
  Re: IBM Fax support for iSeries






  Be warned that 5798FAX isn't supported beyond V5R2.

----- Original Message -----From: Mike CunninghamTo: Midrange Systems Technical DiscussionSent: Tuesday, September 05, 2006 4:38 PM

    Subject: IBM Fax support for iSeries


    I am thinking about ordering IBM Fax Support for iSeries
    http://www-03.ibm.com/servers/eserver/iseries/fax400/ for doing 50-100
    outgoing faxes a day. The documentation says it will work with the
    standard on-board modem on a model 520 but I wanted to check for sure
    before ordering. Is anyone using this product with a model 520 standard
    modem?

Mike Cunningham

--This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailinglist

    To post a message email: MIDRANGE-L@xxxxxxxxxxxx
    To subscribe, unsubscribe, or change list options,
    visit: http://lists.midrange.com/mailman/listinfo/midrange-l
    or email: MIDRANGE-L-request@xxxxxxxxxxxx
    Before posting, please take a moment to review the archives
    at http://archive.midrange.com/midrange-l.

--This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailinglist

  To post a message email: MIDRANGE-L@xxxxxxxxxxxx
  To subscribe, unsubscribe, or change list options,
  visit: http://lists.midrange.com/mailman/listinfo/midrange-l
  or email: MIDRANGE-L-request@xxxxxxxxxxxx
  Before posting, please take a moment to review the archives
  at http://archive.midrange.com/midrange-l.

--This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list

  To post a message email: MIDRANGE-L@xxxxxxxxxxxx
  To subscribe, unsubscribe, or change list options,
  visit: http://lists.midrange.com/mailman/listinfo/midrange-l
  or email: MIDRANGE-L-request@xxxxxxxxxxxx
  Before posting, please take a moment to review the archives
  at http://archive.midrange.com/midrange-l.