Re: Disk 99% full, what to do?

[Wayne McAlpine <wayne.mcalpine@xxxxxxxxxxxxxxxxx>]

Sorry, it's call unprotected on this screen.

IGS Ang wrote:
> Sorry to sound a noob, but i dont see temp in the wrksyssts screen
> below. Am i missing something?
>                         Work with System Status                    IGS810
>                                                            08/04/06  
> 01:19:13
> % CPU used . . . . . . . :         .6    Auxiliary storage:
> % DB capability  . . . . :         .0      System ASP . . . . . . :    
> 87.74 G
> Elapsed time . . . . . . :   00:00:00      % system ASP used  . . :    
> 40.4056
> Jobs in system . . . . . :        187      Total  . . . . . . . . :    
> 87.74 G
> % perm addresses . . . . :       .007      Current unprotect used :     
> 2029 M
> % temp addresses . . . . :       .010      Maximum unprotect  . . :     
> 2126 M
>
> Type changes (if allowed), press Enter.
>
> System    Pool    Reserved    Max   -----DB-----  ---Non-DB---
> Pool   Size (M)  Size (M)  Active  Fault  Pages  Fault  Pages
>   1      175.30     89.66   +++++     .0     .0    1.3    1.3
>   2      884.49       .73      62     .0     .0     .0     .0
>   3      429.19       .00      19     .0     .0    4.1    4.1
>   4       15.03       .00       5     .0     .0     .0     .0
>
> Regards,
> daniel
>
> On 8/4/06, Wayne McAlpine <wayne.mcalpine@xxxxxxxxxxxxxxxxx> wrote:
> > Do a WRKSYSSTS and take a look at the amount of temporary storage used.
> >   Both the maximum (since the last IPL) and the current temp storage are
> > shown.  This will tell you whether it is your user objects that are
> > gobbling up the storage or system objects, e.g., QTEMP libraries, 
> > joblogs.
> >
> > Pete Massiello wrote:
> > > If you can re-ipl to get some minor space back.  Then you can probably
> > > apply all your PTFs permanently.  This should give you 1 to 2% of disk,
> > > where you can run gather and retrieve DSKINFO to figure out the real
> > > culprit.
> > >
> > > Pete
> > >
> > > ---------------------------- Original Message 
> > ----------------------------
> > > Subject: Disk 99% full, what to do?
> > > From:    "IGS Ang" <igsang@xxxxxxxxx>
> > > Date:    Thu, August 3, 2006 6:09 am
> > > To:      MIDRANGE-L@xxxxxxxxxxxx
> > > 
> > -------------------------------------------------------------------------- 
> >
> > >
> > >> Hello All,
> > >>
> > >> Out of nowhere, my disk utilization is 99% (total 500gb). I can go
> > >> disktasks, but i doubt the job will ever finish. The system is
> > >> development, hence i can re-ipl anything.
> > >>
> > >> Please advise what i can do, or is there any ways to locate those big
> > >> files via search command?
> > >>
> > >> Regards,
> > >> Daniel
> > >> --
> > >> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > >> list
> > >> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > >> To subscribe, unsubscribe, or change list options,
> > >> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > >> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > >> Before posting, please take a moment to review the archives
> > >> at http://archive.midrange.com/midrange-l.
> > >>
> > >>
> > >
> > >
> > --
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
> > list
> > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.