Re: MIDRANGE-L Digest, Vol 5, Issue 1232

Dear Brian,
   
  If you are requesting the overlay via a printer file, you have some control 
of the overlay's placement as outlined below:
   
   Front side overlay:                                                    
   Overlay  . . . . . . . . . . .   *NONE         Name, *NONE, *SAME    
     Library  . . . . . . . . . .                 Name, *LIBL, *CURLIB  
   Offset down  . . . . . . . . .                 0-57.790, *SAME       
   Offset across  . . . . . . . .                 0-57.790, *SAME       
                                                                        
The offsets can be up to 57.79 cm or 22.75 inches depending upon the UOM 
selected.
   
  If you are using the DDS keyword OVERLAY, you are able to specify where the 
overlay should be placed with positioning values.
   
  In either case, it is possible to move the overlay around on the page to get 
it properly centered.
   
  HTH
   
  Best Regards,
   
  /Paul
  
message: 4
date: Wed, 14 Jun 2006 15:02:36 -0400
from: Brian 
subject: How can I adjust an overlay's page position?

How can I adjust the position an overlay is printed on the page? The overlay
was created from a TIFF image and covers nearly all of a letter size page.
I've tried adjusting the NO PRINT BOUNDRY tags on the workstation
customization object but still the image is runs off the right side of the
page by about a quarter of an inch. Any ideas?

Kind regards,

BJ




Paul Tykodi
Principal Consultant
TCS - Tykodi Consulting Services LLC

Tel/Fax: 603-343-1820
Mobile:  603-866-0712
E-mail:  ptykodi@xxxxxxxxx
WWW:     http://www.tykodi.com
 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com