RE: Warning light on secondary cabinet of 520 ^H^H^H OOPS, I meant 510

STRSST
1 to start a service tool
7 for HW service manager
5 for SPCN
Enter to continue
F6 to disable battery checking

Keep in mind your SRC won't go away until you remove and reinsert the
battery.  Remove it, wait a minute or so, and then re-insert.

I can vouch that this works on a 5073-style tower.  YMMV on other
models.


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of James H H Lampert
Sent: Wednesday, May 24, 2006 12:00 PM
To: Midrange Systems Technical Discussion
Subject: Re: Warning light on secondary cabinet of 520 ^H^H^H OOPS, I
meant 510

"Haase, Justin C." wrote:
> If it behaves like the other systems with batteries, you should be 
> able to turn off battery checking through SST, then remove/install the

> batt. . . .

Not being an SST expert, how would one turn off battery checking?

I'm reminded of something that happened many years ago with our late,
lamented D02. The system started buzzing, not long before we moved from
Lake Forest to Costa Mesa. 
When we powered it up in the new office (even as the remodeling was
continuing around it), I tracked the buzz down to the battery backup
module. Since an unexpected shutdown of that box was of little
consequence, I simply pulled the module out permanently. Kept the cable
as a souvenir; it may still be around here someplace.

--
JHHL
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



CONFIDENTIALITY NOTICE:  This e-mail communication, including attachments, is 
covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is 
confidential, and may be legally privileged.  If you are not the intended 
recipient or believe you received this communication in error, please reply to 
the sender indicating that fact and delete the copy you received.  In addition, 
retention, dissemination, distribution, copying, or otherwise use of the 
information contained in this communication is strictly prohibited.  Thank you.