Backing up the IFS

Hello,

 

I am trying to back up the IFS to DVD-RAM.  I am on V5.3.  

 

The command I am using is 

 

SAV        DEV('/QSYS.LIB/OPT01.DEVD') OBJ(('/*') +    

             ('/QSYS.LIB' *OMIT) ('/QDLS.LIB' *OMIT))   

 

 

When I run the command I get the following Error.  Does anybody have any
ideas what's going on?

 

 

 

                 Additional Message Information                     Page
1

5722SS1 V5R3M0  040528                        S108A5FE  02/16/06  16:37:34
EST

 Message ID . . . . . . :   CPF382B       Severity . . . . . . . :   30

 Date sent  . . . . . . :   02/16/06      Time sent  . . . . . . :
16:37:13

 Message type . . . . . :   Escape

 From . . . . . . . . . :   HORVAT        CCSID  . . . . . . . . :   65535

 From program . . . . . . . . . :   QSRGENSE

   From library . . . . . . . . :     QSYS

   From module  . . . . . . . . :     QSRINVOK

   From procedure . . . . . . . :     qsrCanInvokeLibraryCmd__Fv

   From statement . . . . . . . :     68

 To program . . . . . . . . . . :   SAVIFS

   To library . . . . . . . . . :     HORVAT

   Instruction  . . . . . . . . :     000C

 Time sent  . . . . . . . . . . :   16:37:13.958624

 Message . . . . :   Parameters not valid with multiple file systems.

 Recovery  . . . :   Do one of the following and try the request again:

     -- Specify OBJ('/*')

     -- Specify OBJ(('/*') ('/QSYS.LIB' *OMIT) ('/QDLS' *OMIT))

     -- Specify OBJ(('/*') ('/QSYS.LIB' *OMIT) ('/QDLS' *OMIT)) ('other
values'

   *OMIT))

     -- Specify a tape or optical device on the DEV parameter.

     -- Specify *MOUNTED on the VOL parameter.

     -- Specify '*' on the OPTFILE parameter.

     -- Specify *NONE on the OUTPUT parameter.

     -- Specify *ALL on the SUBTREE parameter.

     -- Specify *LCL on the SYSTEM parameter.

     If this is the SAV command:

     -- Specify *ALL for the start date on the CHGPERIOD parameter.

     -- Specify *ALL for the end date on the CHGPERIOD parameter.

     -- Specify *ALL for the start time on the CHGPERIOD parameter.

     -- Specify *ALL for the end time on the CHGPERIOD parameter.

     -- Specify *NO on the PRECHK parameter.

     -- Specify *YES on the UPDHST parameter.

     -- Specify *GEN on the LABEL parameter.

     -- Specify *NO on the SAVACT parameter.

     -- Specify *END on the SEQNBR parameter.

     -- Specify *CURRENT on the TGTRLS parameter.

     If this is the RST command:

     -- Specify *SEARCH for the LABEL parameter.

     -- Specify *NONE or *ALL on the ALWOBJDIF parameter.

     -- Specify *ALL on the OPTION parameter.

     -- Specify *SEARCH on the SEQNBR parameter.

     -- Specify *SAVED on the SOMOBJID parameter.

              * * * * *   E N D   O F   L I S T I N G   * * * * *

 

 

Fred Horvat

horvat@xxxxxxxx

216-426-5692