RE: Load Source Drives at 99.9% or ++++

Great, thanks all.

Brian.

-----Original Message-----
From: steema@xxxxxxxxxxxxx [mailto:steema@xxxxxxxxxxxxx] 
Sent: Friday, January 13, 2006 10:34 AM
To: Midrange Systems Technical Discussion
Subject: Re: Load Source Drives at 99.9% or ++++

PRTDSKINF will give you a listing of the largest members, also check
outq's.
You can delete spool files based on date.
> Hi All,
>
>
>
> I had a look at our disk status today, and I see that our load source
> drives are running at 99.9% or ++++.  I know this is very bad and
> serious news, but I was wondering if anything can be done as a
temporary
> countermeasure to clean them up until we have time to swap them out?
>
>
>
> Our system was originally configured with a pair of 4GB drives as the
> load source and the remaining seven drives 17GB drives as our data
> storage (all are RAID-5).  However, I think we need to seriously
> consider swapping out these drives and running all on the 17GB drives.
>
>
>
> Brian.
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-
>
> Brian Piotrowski
>
> Specialist - I.T.
>
> Simcoe Parts Service, Inc.
>
> PH: 705-435-7814
>
> FX: 705-435-6746
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>