Re: restarted router, lost all c/a signon screens.

Many times the interface needs to be restarted and you might even find the
Ethernet line description
in a RCYPND or RCYCNL state.

Use NETSTAT, option 1 to work with the interfaces.  Try option 10 to end
the interface and option 9 to start it again.

You can also check the status of the line using WRKCFGSTS *LIN *ELAN.  If
its status is RCY___ (or maybe FAILED)
you will have to vary off and back on the line and then start the
interfaces again.
----------------------
Scott

Scott A. Schollenberger
Chief Technology Officer
TENEX Systems, Inc.
2011 Renaissance Blvd., Suite 100
King of Prussia, PA  19406
Phone: 610-239-9988  Ext. 305
Fax: 610-239-9995
E-mail: saschollenberger@xxxxxxxxxxxx
Web: www.tenexsys.com

IBM Certified Specialist - eServer i5 iSeries Technical Solutions
Implementer V5R3

CONFIDENTIALITY NOTICE:  This email message, including any attachments, is
for the sole use of the intended recipient(s) and contains confidential and
privileged information.  Any unauthorized review, use, disclosure or
distribution is prohibited.  If you are not the intended recipient, please
contact the sender by reply email and destroy all copies of the original
message.

----------------------
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."    --Benjamin Franklin
----------------------


                                                                           
             "Booth Martin"                                                
             <booth@xxxxxxxxxx                                             
             om>                                                        To 
             Sent by:                  "Midrange Systems Technical         
             midrange-l-bounce         Discussion"                         
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
                                                                        cc 
                                                                           
             11/03/2005 10:44                                      Subject 
             AM                        restarted router, lost all c/a      
                                       signon screens.                     
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




restarted router, lost all  c/a  signon screens.

A client just called, and he doesn't have any idea who to call, or how to
fix it.  He has an iSeries and a small LAN.

The network uses a SMC EZSwitch 16 port switch.  One of the users lost
connectivity to the network, so he unplugged and re plugged the switch, to
reset it.  Since then the network works fine, excepting for the iSeries.
No
one in the office is able to get a sign on screen with Client Access.   I
can dial into a modem, which goes to a D-Link router, then to the switch,
and then the iSeries, and that works jut fine.



---------------------------------
Booth Martin
http://www.martinvt.com
---------------------------------
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.