RE: Send Distribution (SNDDST)

What do I tell them to look for?

-----Original Message-----
From:
midrange-l-bounces+dwayne.allison=affirmativeinsurance.com@xxxxxxxxxxxx
[mailto:midrange-l-bounces+dwayne.allison=affirmativeinsurance.com@midra
nge.com]On Behalf Of Chris Davidson
Sent: Thursday, June 23, 2005 3:07 AM
To: Midrange Systems Technical Discussion
Subject: RE: Send Distribution (SNDDST)


If you suspect the network guys have changed something, you could try asking 
them to double check that the mail server is set up to allow it to forward on 
mail from both your iseries IP addresses.  When I set up our iseries to do 
SNDDST that was the final problem that stumped me for a while.

Does anyone know if SNDDST will still work when IBM removes SNA support?  Or Am 
I getting worried over nothing.

Cheers

Chris
-----Original Message-----
From: Dwayne Allison [mailto:Dwayne.Allison@xxxxxxxxxxxxxxxxxxxxxxxx] 
Sent: Wednesday, June 22, 2005 06:59
To: Midrange Systems Technical Discussion
Subject: RE: Send Distribution (SNDDST)

It's running.

Mail Server Framework currently active

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Jeffrey Young
Sent: Wednesday, June 22, 2005 12:17 PM
To: Midrange Systems Technical Discussion
Subject: RE: Send Distribution (SNDDST)


Is MSF started on the iSeries?
Try using the STRMSF command.
Your email may be in the distribution queue and waiting for MSF to take it and 
send to internet.


Dwayne Allison <Dwayne.Allison@xxxxxxxxxxxxxxxxxxxxxxxx> wrote:
I will ask the power that be

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of
michael@xxxxxxxxxxxxxxxxxx
Sent: Wednesday, June 22, 2005 11:27 AM
To: Midrange Systems Technical Discussion
Subject: RE: Send Distribution (SNDDST)


Has anything changed in your SMTP attributes, particularly the FIREWALL
or MAILROUTER parameters? Anything up with the distribution queue or
routing table entries (CFGDSTSRV)?

> -------- Original Message --------
> Subject: RE: Send Distribution (SNDDST)
> From: "Dwayne Allison" 
> Date: Wed, June 22, 2005 12:06 pm
> To: "Midrange Systems Technical Discussion" 
> 
> I check the log and it says it was sent successfully.
> 
> 
> Message . . . . : Send distribution completed successfully. 
> 
> Cause . . . . . : The send distribution has completed successfully. The 
> distribution identifier is OLDAM ALLISOND1764. 
> 
> 
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Dwayne Allison
> Sent: Wednesday, June 22, 2005 9:37 AM
> To: Midrange Systems Technical Discussion (E-mail)
> Subject: Send Distribution (SNDDST)
> 
> 
> We have a test box and a Production box. We can send distribution e-mail out 
> on the production box, but not on the test box. At one time we were able to 
> send out on both boxes. But now it's just one box. I think the network 
> department has change some on the exchange server to prevent this, but they 
> say that nothing has changed. 
> 
> Is there something on the box I need to look for the is vary off and needs to 
> be vary back on?
> 

The security of e-mail communications by internet is not guaranteed and 
therefore Logic Group Plc ("Logic") does not accept any legal responsibility 
for the accuracy of or the contents of this message.  This e-mail and it's 
attachments are confidential and are intended for the above named recipient(s) 
only.  The statements and opinions contained in this e-mail may not necessarily 
represent those of Logic.

If you are not the intended recipient, any disclosure, reproduction, 
distribution, storage, dissemination or use of this communication, in whole or 
in part, is not authorised.

If you have received this e-mail in error, please advise the sender by using 
the reply facility in your e-mail software and permanently delete the message 
from your system.

All messages sent and received by Logic are monitored for viruses and 
unsuitable content.  As a result e-mail users should be aware that internal and 
external communications may be accessed.
_________________________________________________________
This message has been checked for all viruses by BTnet VirusScreen.
The service is delivered in partnership with MessageLabs.
This service does not scan any password protected or encrypted
attachments.  
If you are interested in finding out more about the service,
please visit our website at
http://www.btignite.com/internetservices/btnet/products_virusscreen.htm
==============================================================