× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. June 2005

Re: Two network cards in a model 170

And in this case a FC #2838 will come alive in a low speed slot and may even vary on. However the second you try to run traffic across it the card will fail and may take the IOP down with it.

Also you can put one in E08 in a 7101 or 7102 expansion as well as E09, though this one isn't a 'supported' slot.

You can put in FC #2723 10Mbps ethernet cards in any low speed slot. In many cases a 10Mb card is plenty fast for a 170.

- DrFranken.

SASchollenberger@xxxxxxxxxxxx wrote:

Richard --

Looking at the system builder, the #2838 LAN IOA requires a high-speed
slot.
C03 is the only slot available for that card in a 170 system unit.

A second card could be installed in E03 in a #7101 or #7102 expansion unit.
----------------------
Scott

Scott A. Schollenberger



As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.