|
midrange.com
What are your CHGSMTPA values? Specifically the mail
router and firewall values?
If you have a domain name in the mail router, ping it to
make sure it resolves to the proper IP. I've seen
sometimes where people will put a host table entry in and
when the IP changes of the mail router, they're hosed.
Also, make sure FIREWALL is set to *YES.
Stop and restart the SMTP server to make sure. Then
restart MSF with *CLEAR one more time after this and see
how things work.
If the mail isn't getting to the mail router, something is
hosed. normally from my experience supporting email
products is one of the things mentioned above.
I have other stuff that may help in my MAILTOOL FAQ page
at:
www.bvstools.com/docs/mailtool/faq.html.
Finally, I hate to see people struggle with the IBM SMTP
server and/or SNDDST. Try downloading a trial of
MAILTOOL... you can try it free for 30 days. If you use
the MAILTOOL Plus! option we can do a LOT more tracking on
the AS/400 side to see where the problem may be. Even if
you don't want to use the software, it may help track down
the issue with your email problems.
www.bvstools.com/mailtool.html is where you can download
and get a free trial key.
Brad
www.bvstools.com
On Fri, 20 May 2005 16:10:55 +0100
stuart.holmes@xxxxxxxxxxxxxxx wrote:
>
>
>
>
> Chris,
>
> I have tried restarting MSF multiple time using the
> *CLEAR option. When I
> send the test mail, I get the message on screen that the
> mail has been send
> successfully to MSF and checking the joblog for the
> active QMSF job there
> are no error in the joblog.
>
>
> Best Regards.
>
>
>
>
>
>
> Stuart Holmes.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Stuart Holmes LeasePlan
> Infrastructure Services
>
>
> iSeries Specialist
> Leaseplan House, Level 2
>
>
> +353 (0)1680 4200 Central
> Park, Leopardstown
>
>
>
Dublin
> 18, Ireland
>
>
> stuart.holmes@xxxxxxxxxxxxxxx Administration:
> +353 (0)1680 4200
>
>
> Service Support:
> +353 (0)1680 4242
>
>
> Listening, Building, Serving Fax :
> +353 (0) 1 680 4250
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Chris Bipes
>
>
> <chris.bipes@cross-c To:
> "'Midrange Systems Technical Discussion'"
> <midrange-l@xxxxxxxxxxxx>
> heck.com> cc:
> (bcc: Stuart Holmes/LPIS/LeaseNotes)
>
> Sent by:
> Subject: RE: MSF Mail relay issue
>
> midrange-l-bounces@m
>
>
> idrange.com
>
>
>
>
>
>
>
>
> 20/05/2005 15:59
>
>
> Please respond to
>
>
> Midrange Systems
>
>
> Technical Discussion
>
>
>
>
>
>
>
>
>
> What options did you take on the STRMSF *RESUME, *RESET,
> *CLEAR. Resume is
> the default, try reset if it does not work, try clear.
> You can have a bad
> message hanging the QMSF job.
>
> Chris Bipes
> Information Services Director
> CrossCheck, Inc.
>
>
> -----Original Message-----
>
>
> Chris,
>
> I should have included in the list of investigation steps
> that I can both
> ping the relay server and telnet to it using port 25.
>
> Best Regards.
>
>
> Stuart Holmes.
> --
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit:
> http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the
> archives
> at http://archive.midrange.com/midrange-l.
>
>
>
>
> "e-mail disclaimer:
> This message (including any attachments) is confidential
> and may be
> privileged. It is intended for use by the addressee only.
> If you have
> received it by mistake please notify the sender by return
> e-mail and delete
> this message from your system. Any unauthorised use or
> dissemination of
> this message in whole or in part is strictly prohibited.
> Please note that
> e-mails are susceptible to change. LeasePlan Corporation
> N.V. (including
> its group companies) shall not be responsible nor liable
> for the proper and
> complete transmission of the information contained in
> this communication
> nor for any delay in its receipt or damage to your
> system. LeasePlan
> Corporation N.V. (or its group companies) does not
> guarantee the
> confidentiality of this message, nor that the integrity
> of this
> communication has been maintained nor that this
> communication is free of
> viruses, interceptions or interference."
>
> --
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit:
> http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the
> archives
> at http://archive.midrange.com/midrange-l.
>
Bradley V. Stone
BVS.Tools
www.bvstools.com
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
