RE: AS/400 model 250 with SRC 1014507 ?

[rob@xxxxxxxxx]

Just making sure it isn't insisting on a tape because you told it to IPL 
from tape.
Yes, 01 B - N is normal.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Chuck Lewis" <clewis@xxxxxxxxxx> 
Sent by: midrange-l-bounces+rob=dekko.com@xxxxxxxxxxxx
04/14/2005 09:07 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: AS/400 model 250 with SRC 1014507 ?






Rob,

Been long while since I've messed with IPL options. Are you asking me what
theirs is or telling me what it should be ? :-)

I am thinking 01 B - N is normal ?

Thanks !

Chuck

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 13, 2005 2:47 PM
To: Midrange Systems Technical Discussion
Subject: Re: AS/400 model 250 with SRC 1014507 ?

01 - B - N
or
01 - D - M

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Chuck Lewis" <clewis@xxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
04/13/2005 02:16 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
AS/400 model 250 with SRC 1014507 ?






Hi folks,

 

Had a friend contact me and they were firing up a 250 that had not been on
in some time. They have the System Attention light on and B1014507
displayed. I tried searching and found:

 

B1xx 4507 

 

These SRCs appear if the tape device for the alternate IPL was not found 
or
was not ready. Make sure the tape device is powered on and the correct 
tape
is loaded and ready. To make tape devices ready, you may need to open and
close the tape device door. 

Then perform the appropriate procedure under Installation
<
http://publib.boulder.ibm.com/iseries/v5r2/ic2924/books/c415120633.htm#HDRK


WICSRC>  Recovery after SRCs. 

But this seems to be in reference to loading a system or something (?) and
they are not (intentionally) trying to do that.

They  checked and there was a tape loaded in the tape drive and they took 
it
out and re-IPL'd and got the SAME thing. The door on the tape unit is shut
good.

Anyone have any idea what this could be ?

 

Thanks !

 

Chuck

-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.