An ugly exit. *EXITRG that is.

All,

I have posted on this before, and here I go again.

For the 3rd time since going to V5R3 last September, I lost all FTP and
REXEC exit points.  This happened yesterday morning.  Since 98% of customer
orders arrive on the i5 via FTP and are processed by a command issued via
REXEC from another system, this is a real problem for us.

The first time this happened was on the 270, we have since gone to an i5 520
where it has happened twice.  This morning many of the MSF exit points were
missing.  All 3 times it has happened this way.  FTP and REXEC one day, MSF
the next.  A simple call replaces the FTP and REXEC exit points, but MSF
exit points must be replaced manually one by one.

Each time it has happened, it was immediately after either loading or
upgrading the Standguard Antivirus from Byteware.  I pitched a Holy H***fit
to Supportline.  They have at least 8, and maybe 10, developers working on
finding out what in the world is going on.  IBM says they don't believe that
Standguard is the problem, per se, but that something that Standguard is
doing is not being handled properly by IBM.  IBM and Standguard are in
contact with each other on this issue.

We made a bit of headway yesterday by finding this in a joblog:

CPD3C69 Diagnostic 30 03/01/05 05:02:42.839032 QUSRGFA2 QSYS *STMT QP0FEPFS
QSYS *STMT
>From module . . : QUSRGFCM
>From procedure  : CHKAUT_OBJ_HDLR
Statement . . . : 78
To module . . . : QP0FSCAN
To procedure  . : Qp0fCallScanExit__FP10EPFS_VnodeiLUi23qp0lScan
ExitProgramType
Statement . . . : 99
Message . . . . : Object QUSEXRGOBJ in library QUSRSYS recreated.
Cause . . . . . : The secondary space pointers in object QUSEXRGOBJ were not
set, and the object is not usable.  The object has been recreated with new
secondary spaces.  A loss of data may have occurred.  It is recommended that
you restore this object from your backup tapes.

The above was from job 068258/QSYS/QCSTCTHRMD.  (A clustering job.  We don't
use clustering so IBM removed the autostart job entries.)  This explained
how the exit points disappeared (because QUSEXRGOBJ was recreated) but not
what caused QUSEXRGOBJ to become unusable.

The Standguard virus scan also failed last night.  Something about an exit
point.  Go figure.  I'll be calling them shortly.

If anyone else is having a similar issue with exit points and/or Standguard,
I think IBM would be interested.  They're looking for all the info they can
get.

-- 
Jeff Crosby
Dilgard Frozen Foods, Inc.
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531

The opinions expressed are my own and not necessarily the opinion of my
company.  Unless I say so.