RE: Ethernet adapter protocol support

You could use AnyNet to encapsulate the SNA in TCP/IP however. You can
also run DDM over TCP/IP.

> -------- Original Message --------
> Subject: Re: Ethernet adapter protocol support
> From: "Bryan Dietz" <BDietz@xxxxxxxxxx>
> Date: Wed, January 26, 2005 12:20 pm
> To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
> 
> Nick,
> The embedded Etherneta cards do not support SNA communications.
> 
>  As a matter of fact, none of the gigabit ethernet cards do either.
> 
> This is documented somewhere, but I could not find it.
> 
> ----------------------------
> Bryan Dietz
> Aktion Associates
> 
> midrange-l-bounces@xxxxxxxxxxxx wrote on 01/26/2005 12:15:28 PM:
> 
> > Hello All:
> >
> > I need to set up DDM over SNA for a test I'm running and can't make
> > STRPASTHR connect to or run from a model 520.  I get a CPA5714 message
> that
> > the system can't call the controller because no lines are available.  One
> of
> > the reasons the 2nd level text provides is that the ethernet port may not
> > support any protocol except TCP/IP.
> > The ethernet port in this box is a 5706-001.
> >
> > Can someone point me to documentation that tells me what protocols it
> > supports?
> >
> > TIA,
> >
> > Nick Blattner
> >
> 
> 
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.