× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



The DVD and the tape cartridge (in that same vicinity) do not allow 
concurrent maintenance.  I found it funny that I could do concurrent 
maintenance on raid protected disks and all sorts of critical stuff - but 
not those two items.  Some technical reason for it - but still silly in my 
opinion.  Don't know if this has been resolved on the i5.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Haase, Justin C." <justin.haase@xxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
01/20/2005 09:57 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: How to install an optical drive in a 810?






You'd think you could use concurrent maintenance and do a remove/add. Then
just delete the hardware resource that will show up as the optical drive
with a ? In the "work w/ non-reporting" screen.

Not sure if it would work or not - worth a shot rather than IPLing.

jch 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wilt, Charles
Sent: Thursday, January 20, 2005 8:48 AM
To: Midrange Systems Technical Discussion
Subject: RE: How to install an optical drive in a 810?

Ok, well digging through the infocenter was easier than expected.

Looks like my answers are:

1) yes, box must be shutdown
2) yes, DVD-RAM must replace DVD-ROM


Anybody have anything to add?

Thanks,

Charles Wilt
iSeries Systems Administrator / Developer Mitsubishi Electric Automotive
America
ph: 513-573-4343
fax: 513-398-1121
 

> -----Original Message-----
> From: midrange-l-bounces+cwilt=meaa.mea.com@xxxxxxxxxxxx
> [mailto:midrange-l-bounces+cwilt=meaa.mea.com@xxxxxxxxxxxx]On
> Behalf Of
> Wilt, Charles
> Sent: Thursday, January 20, 2005 9:23 AM
> To: Midrange Systems Technical Discussion (E-mail)
> Subject: How to install an optical drive in a 810?
> 
> 
> All,
> 
> Got a new (refurbished) 4530 DVD-RAM drive to install in our 810. 
> Which currently has a single DVD-ROM drive.  Actually, there's also an 
> attached expansion tower with a second DVD-ROM and disks for our 
> development partition. I'll be looking in the Info Center for 
> instructions, but I thought I'd post a request out here too.
> 
> Anybody know what I need to do to install this baby?  Do I need to 
> shutdown the box, or can I install it hot?  Can I leave the DVD-ROM or 
> does the DVD-RAM need to replace it?
> Any additional instructions?
> 
> Thanks in advance,
> 
> Charles Wilt
> iSeries Systems Administrator / Developer Mitsubishi Electric 
> Automotive America
> ph: 513-573-4343
> fax: 513-398-1121
> 
> 

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, 
unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


CONFIDENTIALITY NOTICE:  This e-mail communication, including attachments, 
is covered by the Electronic Communications Privacy Act, 18 U.S.C. 
2510-2521, is confidential, and may be legally privileged.  If you are not 
the intended recipient or believe you received this communication in 
error, please reply to the sender indicating that fact and delete the copy 
you received.  In addition, retention, dissemination, distribution, 
copying, or otherwise use of the information contained in this 
communication is strictly prohibited.  Thank you.


-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.