Re: Label Printers ?

Good points Dave.  I would think in this day and age those PC programs 
would not need the printer to be physically attached to them anyway.  Lan 
attached should be sufficient.

We are playing with a OTC wireless network adapter to control the Marknet 
adapter that controls our test Intermec 3400 barcode printers and our 
laser printer for our department.  (I am sure Dave can picture right where 
these are at.)

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





daparnin@xxxxxxxxxxxxxxxxxx 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
01/19/2005 09:25 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Subject
Re: Label Printers ?










> You can definitely do it without a PC.  There are adapters available 
that
> even allow you to attach the printers via Twinax. :)


Forget twinax and the PC.  IMO The easiest, simplest method is to use a
network printer adapter such as a JetDirect or Marknet.  Using a wireless
network adapter could be a decent option too.  The PC might be an option 
if
you also need to print from PC software such as Label Matrix but going
straight from the AS/400 to the printer tends to simplify things, requires
less maintenance, and eliminates potential cabling headaches.

Dave Parnin
Nishikawa Standard Company
Topeka, IN  46571
daparnin@xxxxxxxxxxxxxxxxxx




  
                      Scott Klement  
                      <midrange-l@scottkle        To:       Midrange 
Systems Technical Discussion 
                      ment.com> <midrange-l@xxxxxxxxxxxx>@SMTP@CTB    
                      Sent by:                    cc:       (bcc: David A 
Parnin/Topeka/NISCO/SPCO) 
                      midrange-l-bounces@m        Subject:  Re: Label 
Printers ? 
                      idrange.com  
  
  
                      01/18/2005 04:53 PM   
                      Please respond to   
                      Midrange Systems   
                      Technical Discussion   
                      <midrange-l@midrange   
                      .com>  
  
  




Hi,

> The real issue gets to be what type of printer to use. They will need
> one dedicated to this and I am not sure what to choose or how to write
> to it. We have used the Eltron printers for UPS and the labels come on
> rolls. But that is a PC application that writes to that printer.

We use Datamax printers here. Mostly Prodigy printers that we bought way
back in the early 90's. We've got about 30 of these printers and they run
ALL the time. By that, I mean from the start of first shift to the end of
2nd shift (approx 16 hours) they are printing continuously, as the workers
pull one label out of them at a time and place them on the packages.

We've also had some experience with the newer Datamax printers (such as
the I-4208) and if I had to start over again,

We use TL Ashford's Barcode400 software (http://www.barcode400.com) to
generate labels, though you can also write your own programs that generate
them if you're willing to program in all of the printer escape codes
(which I've also done, it's not difficult... the only trick is that there
are some control characters that you have to figure out how they'll get
translated when sent to the PC to end up with the right results. WSCST
helps a lot.)

You can definitely do it without a PC.  There are adapters available that
even allow you to attach the printers via Twinax. :)


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.