RE: 5494 Remote Controller in a TCPIP network

If you are talking about IBM 5494s...

They don't have TCP/IP address since they don't used TCP/IP.

They use SNA.

Charles Wilt
iSeries Systems Administrator / Developer
Mitsubishi Electric Automotive America
ph: 513-573-4343
fax: 513-398-1121
 

> -----Original Message-----
> From: Greg Wenzloff [mailto:GWenzloff@xxxxxxxxxxx]
> Sent: Friday, December 03, 2004 9:28 AM
> To: 'midrange-l@xxxxxxxxxxxx'
> Subject: 5494 Remote Controller in a TCPIP network
> 
> 
> We changed from leased lines to a frame relay network about 4 
> years ago.  At
> that time I was not involved in setting this up.   There are 2 remote
> workstation controllers at the distant side of the network.
> 
> I am being asked what is the TCPIP address of these 2 
> controllers.   I can
> not find this info when I look at the controller's 
> description or anywhere
> else.
> 
> I'm not even sure that they have IP addresses.  Perhaps they 
> work with MAC
> addresses.
> 
> Could someone point me in the right direction on this.
> 
> TIA,
> Greg Wenzloff
> --
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>