RE: I5 systems in production

[Neil Palmer/DPS <neilp@xxxxxxxxxxx>]

You should be able to connect directly to the system with the defaul 
address using either a crossover cable, or a small hub/switch disconnected 
from the rest of your network, then change the settings on the iSeries to 
use a different set of IP addresses.

...Neil




"Jeff Crosby" <jlcrosby@xxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
2004/11/25 08:31



To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: I5 systems in production






> 2. IP subnetting conflict - Ops Console direct connect insists on
> a certain
> subnet - 192.168.0.1 - .255, I think. If this is also your company's
> internal subnet, Ops Console will not work. Either use a laptop or other
> machine not connected to your network, or change your network's entire
> addressing scheme.  ;-)

What?!  Our entire LAN is 192.168.0.x.  You're telling me that won't work?

--
Jeff Crosby
jlcrosby@xxxxxxxxxxxxxxxx