RE: Model 520 Universal Power Supply ?

I was fairly sure the only difference is the power cord shipped with the 
system - there is no change to the power supply the system is built with. 
Kirk Goins confirmed that.

...Neil




"Chuck Lewis" <clewis@xxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
2004/11/10 09:39



To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: Model 520 Universal Power Supply ?






Neil,

This is going WAY back for me, but I seem to remember that you did have to
specify a certain power cord when we ordered ours so that would tend to 
say
it is a power supply that can handle that ?

But I am CERTAINLY not positive so don't go plugging one in, powering up 
and
frying something on my word :-)

Chuck

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Neil Palmer/DPS
Sent: Tuesday, November 09, 2004 8:30 PM
To: Midrange Systems Technical Discussion
Subject: Model 520 Universal Power Supply ?

Can anyone confirm if the model 520's have a Universal Power Supply ?
If the system was ordered with a 250v power cord but the customer wants to 

use 120v power, do they just need to change the power cord - maybe use one 

off an older AS/400 or iSeries being replaced by the 520 ?

...Neil