Re: Internal failure in system cross reference program

["Luis Rodriguez" <luisrodriguez@xxxxxxxxxxx>]

Colin,

I don't remember exactly but, to the best of my recollection, it wasn't
very long. OS/400 has some tables that ?cross-reference? all the tables
in the system like, for example, QSYS/QADBXREF. In our case these tables
got corrupted and the RCLSTG (*DBXREF) command fixed that. 

Of course, the system has to be put in a restricted mode...


Regards,

Luis Rodriguez


>------------------------------
>
>message: 13
>date: Mon, 1 Nov 2004 21:09:13 -0000
>from: "colin williams" <colin.williams@xxxxxxxxxxxx>
>subject: Re: (no subject)
>
>Luis,
>
>how long did that take to run?
>
>cheers
>Colin.W
>----- Original Message -----
>From: "Luis Rodriguez" <luisrodriguez@xxxxxxxxxxx>
>To: "Midrange" <midrange-l@xxxxxxxxxxxx>
>Sent: Monday, November 01, 2004 8:33 PM
>Subject: (no subject)
>
>
> Carl,
>
> Had that problem on a V4R5 box once. Someone had canceled a RCLSTG. We
> did a RCLSTG (*DBXREF) and the problem was solved.
>
> Hope this helps,
>
> Luis Rodriguez
>
>
> >------------------------------
> >
> >message: 9
> >date: Mon, 1 Nov 2004 15:21:18 -0500
> >from: "Carl Galgano" <cgalgano2@xxxxxxxxxxxxxxxxx>
> >subject: Internal failure in system cross reference program
> >
> >Anyone ever see this error message before???
> >
> >Message . . . . :   Internal failure in system cross reference program.
> >
> >
> >
> >Recovery  . . . :   Look at the QDBSRVXR or QDBSRVXR2 job log (DSPJOBLOG
> >
> >  command). Report any messages in these job logs that can be used to
> >identify
> >  the problem.  Report the problem (ANZPRB command).
> >
> >
> >Thanks,
> >cjg