RE: restoring the system (option 22 and 23)

["Ingvaldson, Scott" <SIngvaldson@xxxxxxxxxxxx>]

I suspect that you'll have to go into DST and reset the recovery system to
use the Ops Console.

Regards, 
 
Scott Ingvaldson
iSeries System Administrator
GuideOne Insurance Group   

-----Original Message-----
date: Wed,  8 Sep 2004 14:21:04 +0200
from: subscribe@xxxxxxxxxxx
subject: restoring the system (option 22 and 23)

Hi

I tried to restore a system from 820 to another 820 machine.
Was doing exact steps as described in http://tinyurl.com/579zt

But, during the installing Operating System Operations Console disconnected,
on the panel I saw the attention light (lightning) and the SRC B9003005.

The original system's got Twinax, and the latter one's got Operation
Console.
Then, I tried to do the same steps with SAVE (22 and 23) tapes from the
second
machine
(I backed it up before the whole situation).
And the same error B9003005

It says :
===
Install fails with SRCB9003005 when the direct operational
console is told to disconnect when the PC did not receive its
normal ping in the required time.
===

I can see, the system is still  reading the tape..... :/

Anybody has a clue ? Please ?
   
This message and accompanying documents are covered by the Electronic
Communications Privacy Act, 18 U.S.C. §§ 2510-2521, and contains information
intended for the specified individual(s) only. This information is
confidential. If you are not the intended recipient or an agent responsible
for delivering it to the intended recipient, you are hereby notified that
you have received this document in error and that any review, dissemination,
copying, or the taking of any action based on the contents of this
information is strictly prohibited. If you have received this communication
in error, please notify us immediately by e-mail, and delete the original
message.