Re: Resetting internal modem without IPL

[rob@xxxxxxxxx]

I think that in the same area that you can turn this on/off is an option 
to 'blink' the card.  Then you can verify that the led on the back of the 
card is blinking.  This is a confirmation that you are messing with the 
right card.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





JOberholtzer@xxxxxxxxxxxx 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
09/08/2004 01:08 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Fax to

Subject
Re: Resetting internal modem without IPL











<snip>
Does anyone know if you can reset (maybe power off/on the card) the
internal modems (2791/2793) in a model 270, 800, 810 etc. other than by
IPL'ing the whole system ?
</snip>

If your system supports concurrent maintenance you can reset the card by
itself from the hardware service manager in SST/DST.  Caution, do not do
that by yourself unless you are pretty sure of what you are doing.  Also,
it may not fix the entire problem because the IOP (most likely the 
embedded
one) may need to be reset as well.  If there are any disk units supported
by the IOP, and it needs to be reset, an IPL may be the only way out.

Paul's comment about the reset(*yes) option should work, and has most of
the time I have tried it.

Jim Oberholtzer
Senior Solutions Architect
Computech Resources, Inc.
IBM iSeries Systems Expert

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.