RE: How do you add IP static routes on the AS/400?

CFGTCP 
Option 2

Use option 1 for adding - the configuration parameters should be
familiar to him/her. Also, the help for the screen is pretty good.

This is what our system looks like:

                            Work with TCP/IP Routes

                                                             System:
ORVILLE 
 Type options, press Enter.

   1=Add   2=Change   4=Remove   5=Display

 

      Route            Subnet           Next             Preferred

 Opt  Destination      Mask             Hop              Interface

 

      *DFTROUTE        *NONE            10.50.254.1      *NONE

      10.0.0.0         255.0.0.0        10.50.254.1      10.50.254.44

      192.168.0.0      255.255.0.0      10.50.254.1      10.50.254.45

      199.249.185.0    255.255.255.0    10.50.254.1      10.50.254.45

 

 

 

 

 

 


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Dan Bale
Sent: Wednesday, August 11, 2004 4:45 PM
To: midrange-l@xxxxxxxxxxxx
Subject: How do you add IP static routes on the AS/400?

Question from our new net admin (no prior exp. on AS/400):

How do you add IP static routes on the AS/400?

tia,
db
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.