RE: IBM 6400 Modell I32 - IPDS Configuration V5R2 ???

[CWilt@xxxxxxxxxxxx]

Wasn't the iData box the old way of attaching the 6400 *IPDS to the LAN?  As
I recall it allowed a twinax *IPDS 6400 to be used as a LAN attached *IPDS
prior to the 6400's being enabled for LAN *IPDS through internal network
card.

Is that the iDate box you are talking about Philipp?

Charles


> -----Original Message-----
> From: Paul Tykodi [mailto:ptykodi@xxxxxxxxx]
> Sent: Tuesday, July 13, 2004 11:40 AM
> To: midrange-l@xxxxxxxxxxxx
> Subject: Re: IBM 6400 Modell I32 - IPDS Configuration V5R2 ???
> 
> 
> Hi Philipp,
> 
> As far as I know, the IPDS support of the 6400 line of
> impact printers only supports internal Ethernet or
> coax/twinax adapter cards, which plug directly into
> the printer itself.
> 
> I don't think you can pass unconverted IPDS data
> through an external print server attached to the
> parallel port and have the printer be able to operate
> in its IPDS mode.
> 
> On the AS/400 side, you will need PSF/400 installed
> because the OS/400 IPDS printer driver for TCP/IP
> attached IPDS printers is part of the PSF/400 package.
> 
> HTH
> 
> Best Regards,
> 
> /Paul
> --
> Paul Tykodi
> E-mail: ptykodi@xxxxxxxxx
> 
> >date: Tue, 13 Jul 2004 11:33:18 +0200
> >from: Philipp Rusch <philipp.rusch@xxxxxxxxxxxx>
> >subject: IBM 6400 Modell I32 - IPDS Configuration
> >V5R2 ???
> >
> >IBM 6400 I32 Printer with IPDS to be attached to the
> >LAN with an iDATA Ethernet Printerbox and an AS/400
> >with V5R2.
> >
> >Anybody has an example PSFCFG object and what else to
> >make this thing run. Already have all the links to
> >Info APARS and so on.
> 
> >Will have to go down to Spain from Germany, to
> >configure this. Local spanish staff couldn't make
> >this run, I want to be prepared to make the best out
> >of it.
> >
> >TIA, Philipp
> 
> 
> 
>               
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail is new and improved - Check it out!
> http://promotions.yahoo.com/new_mail
> --
> This is the Midrange Systems Technical Discussion 
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>