× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. July 2004

Re: Printing a System Rack

Hi Bryan

have you tried re-setting an Ops console connection from the front panel yet ? IBM need bigger buttons or I need smaller fingers for this stuff...

At 10:59 a.m. 7/07/2004 -0400, you wrote:

In v5r2 IBM mad some changes to service tools users.

You are going to have to force DST to the console.

First signo off the console, then get to manual mode on the front panel and
then use the arrow up till you get to 21, press enter.
This will force DST to the console device.  the default userid and password
is QSECOFR QSECOFR (upper case).

>From there you will have to change the password.  User option 13 (work
w/system security) to change the third option to a 1.

The from the main DST menu option 5 then option 3 to make sure all profiles
are enabled.

>From there exit out of service tools and put system back into normal mode.

You can then get into STRSST to print your rack config.

(Thanks IBM for making it so easy)

----------------------------
Bryan Dietz

Aktion Associates



As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.