I agree with Ken (as usual), but should point out that you want to reset it
to a '2' during an memory upgrade.  It is easily possible to add so much
memory to a system that you cannot IPL it without an adjustment at IPL.

Al Barsa, Jr.
Barsa Consulting Group, LLC


914-251-9406 fax


             "Graap, Ken"                                                  
             m>                                                         To 
             Sent by:                  "'Midrange Systems Technical        
             midrange-l-bounce         Discussion'"                        
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
             03/29/2004 04:06                                      Subject 
             PM                        RE: wrksyssts non DB-fault paging   
             Please respond to                                             
             Midrange Systems                                              

Turn on Auto Tuning (QPFRADJ = 3) and let the system tune it for you ... It
really does work. It had it's issues in the past, but as of V5R2, auto
tuning is a very good way to keep your system tuned, especially in an
environment where the user decides when and what they want to run!


Kenneth E. Graap
IBM Certified Specialist
AS/400e Professional System Administrator
NW Natural (Gas Services)
Phone: 503-226-4211 x5537
FAX:    603-849-0591

-----Original Message-----
From: Steve Landess [mailto:sjl_123@xxxxxxxxxxx]
Sent: Monday, March 29, 2004 9:48 AM
To: Midrange Systems Technical Discussion
Cc: jdraper@xxxxxxxxxxxxx
Subject: Re: wrksyssts non DB-fault paging

"Jerry" <>
> Subject: wrksyssts non DB-fault paging
> Here are some snapshots of wrksyssts on our 803 over a period
> of about one minute.
> My concern is with the Non-DB Fault column which shows the
>system paging out to the disk...perhaps unncessarily.

> The question is how to remedy this situation.  Is more memory required?
> We have 8GB.

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2022 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.