TCP2617 message

[Dennis Munro <DMunro@xxxxxxxxxxxxxxxxxxxx>]

This is from the QSYSOPR message queue for today on my laptop running CA
dated 20021218 on an 820 running V5R2M0 - one cum behind.  When it occurs,
my green screen session blanks out & I revert back to the sign on screen.

This has been happening for some time but never like today & I can't relate
if it has to do with the last cum install or group ptf install????

TCP/IP connection to remote system 172.20.1.81 closed, reason code 2. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 3. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 2. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 3. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 2. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 3. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 2. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 3. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 2. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 3. 
TCP/IP connection to remote system 172.20.1.81 closed, reason code 2.

Message ID . . . . . . :   TCP2617       Severity . . . . . . . :   20

Message type . . . . . :   Diagnostic

Date sent  . . . . . . :   09/29/03      Time sent  . . . . . . :   15:07:18


Message . . . . :   TCP/IP connection to remote system 172.20.1.81 closed,

   reason code 2.

 Cause . . . . . :   The TCP/IP connection to remote system 172.20.1.81 has

   been closed. The connection was closed for reason code 2.  Full
connection   
   details for the closed connection include:

     - local IP address is 172.20.1.30

     - local port is 23

     - remote IP address is 172.20.1.81

     - remote port is 1263

 Reason codes and their meanings follow:

     1 = TCP connection closed due to expiration of 10 minute Close Wait
timer. 
     2 = TCP connection closed due to R2 retry threshold being run.

     3 = TCP connection closed due to keepalive timeout.

If TCPCNNMSG(*THRESHOLD) is defined for the Change TCP/IP Attributes
(CHGTCPA) 
  command then there could be additional connections that have closed within

  the threshold window. The number of additional TCP connections that have

  closed is 0.

Recovery  . . . :   Informational message.           

Looked at my TCP settings they refer to & they are set at the default
settings.                          

Anything else I should look at?

Thanks - Dennis.

Dennis Munro

"I love deadlines.  I especially like the whooshing sound they make as they
go flying by."  Dilbert's Words Of Wisdom:

Badger Mining Corporation
www.badgerminingcorp.com
dmunro@xxxxxxxxxxxxxxxxxxxx
(920) 361-2388

The information contained in this e-mail message is confidential information
intended only for the use of the individual or entity named above. If the
reader of this message is not the intended recipient, or the employee or
agent responsible to deliver it to the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this
communication in error, please immediately notify us by telephone, and
return the original message to us at the below address via the U.S. Postal
Service, and delete it from your computer.  Badger Mining Corporation  P.O.
Box 328  Berlin, WI 54923  920-361-2388