Re: 9404 Lost IPL Key -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

I had an E02 a while back that was flat dead. Turns out he EPO switch had failed. Snip snip, twiist twist and up she came! Give iSeries almost never get turned off seems like a potential cost saving eh?

- L

Keith Carpenter wrote:

Your're right David,

The lock is a 4 position, single gang switch (5 wires).
It can be easily removed/disconnected and then jumpered
to Manual or rewired with a SPDT switch for Normal/Manual
selection (Secure/Auto settings are probably not needed).

Keith


----- Original Message -----
From: "Shea, David" <DShea@xxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, August 08, 2003 5:45 PM
Subject: RE: 9404 Lost IPL Key

You could also remove the panel with the key and 'hot wire' it if

necessary.

The rocker switch on my old E45 (yes, it still works) is failing. A

little

WD40 usually gets it working again, but on one occasion I pulled off the
panel and used a paper clip to get the machine booted up.

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.