Re: telnet (client access or symtrax) to another as400 via internet

[keith@xxxxxxxxx]

It sounds like your telnet clients are attempting to use a telnet proxy on
the firewall.  Most firewalls do not have good support for TN5250.  You may
want to attempt to use a generic proxy to connect instead of you telnet
proxy, but this would involve either using a different IP port or disabling
your current telnet proxy.  Check with your firewall admin for assistance
on this one as each firewall has a different implementation of this type of
feature.


Good luck,


Keith Blazek
Information Systems Coordinator
Quipp Systems, Inc.
4800 NW 157th Street
Miami, FL  33014

PH: 305-623-8700 ext 308
FX: 305-623-0980



                                                                                
                                                         
                      DAhKow@xxxxxxxxxxxxx                                      
                                                         
                      Sent by:                    To:       
midrange-l@xxxxxxxxxxxx                                                      
                      midrange-l-bounces@x        cc:                           
                                                         
                      idrange.com                 Subject:  telnet (client 
access or symtrax) to another as400 via internet              
                                                                                
                                                         
                                                                                
                                                         
                      07/05/2003 01:24 PM                                       
                                                         
                      Please respond to                                         
                                                         
                      Midrange Systems                                          
                                                         
                      Technical Discussion                                      
                                                         
                                                                                
                                                         








We have an as400 (with a private address) in our n/w , which is protected
by a firewall(with a public address). There is another as400 in another n/w
with the same config. We wanted to use client access or another telnet
client, e.g Symtrax to telnet to the other as400. After resolving all
firewalling and connexion issues, we get the other as400 signon screen.
(i,e we sign on to our as400 and then telnet the address of the firewall on
the other n/w. There the firewall prompts for the ip address (private) of
the other as400)
If we use Client access, we note that the cursor positions itself one
character before the user name input field. However it seems that whatever
we type (which by the way would appear in small letters if the keyboard is
in this mode) is not being correctly received by the other as400. On the
password field, the input is not masked.
If we use Syxtrax as the telnet client, we get the signon screen. But only
the 'User Name' appears. Following that there is a continuous line up to
the bottom of the screen. Similarly, input is not processed correctly .

Any idea anyone?
Thanks & regards


Email : dahkow@xxxxxxxxxxxxx

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.