|
midrange.com
Here is some rough stuff....I'm excluding a lot of the obvious defaults.
For the most part the crtitical things are the adapter adresses and
exchange ID's. I've stuck in your addresses and system names where
appropriate. It's pretty simple but just focus on that the information for
TRNLINE on SYSTEM 1 needs to be in the controller system on SYSTEM 2 and
vice versa. Ah, the old days when my bible was AS/400 Communications
Definitions Examples Volumes 1 and 2. I don't think I'm forgetting
anything.
HTH
SYSTEM 1
Line description . . . . . . . . . : TRNLINE
Category of line . . . . . . . . . : *TRLAN
Resource name . . . . . . . . . . : CMN03
Local adapter address . . . . . . : 400000000020
Exchange identifier . . . . . . . : 05636691
Text . . . . . . . . . . . . . . . : Jupiter Token Ring
Controller description . . . . . . : PLUTO
Category of controller . . . . . . : *APPC
Link type . . . . . . . . . . . . : *LAN
Active switched line . . . . . . . : TRNLINE
Remote control point . . . . . . . : PLUTO
Exchange identifier . . . . . . . : 0561118D
LAN remote adapter address . . . . : 400000000000
Device description . . . . . . . . : PLUTO
Category of device . . . . . . . . : *APPC
Remote location . . . . . . . . . : PLUTO
Local location . . . . . . . . . . : *NETATR
Remote network identifier . . . . : *NETATR
Attached controller . . . . . . . : PLUTO
Message queue . . . . . . . . . . : *CTLD
APPN-capable . . . . . . . . . . . : *YES
Network Attributes
Current system name . . . . . . . . . . . . . . : JUPITER
Pending system name . . . . . . . . . . . . . :
Local network ID . . . . . . . . . . . . . . . . : APPN
Local control point name . . . . . . . . . . . . : JUPITER
Default local location . . . . . . . . . . . . . : JUPITER
Default mode . . . . . . . . . . . . . . . . . . : BLANK
APPN node type . . . . . . . . . . . . . . . . . : *ENDNODE
Data compression . . . . . . . . . . . . . . . . : *NONE
Intermediate data compression . . . . . . . . . : *NONE
Maximum number of intermediate sessions . . . . : 200
Route addition resistance . . . . . . . . . . . : 128
Server network ID/control point name . . . . . . : APPN
SYSTEM 2
Line description . . . . . . . . . : TRNLINE
Category of line . . . . . . . . . : *TRLAN
Resource name . . . . . . . . . . : LIN021
Local adapter address . . . . . . : 400000000000
Exchange identifier . . . . . . . : 0561118D
Text . . . . . . . . . . . . . . . : PLUTO TOKEN RING
Controller description . . . . . . : JUPITER
Category of controller . . . . . . : *APPC
Link type . . . . . . . . . . . . : *LAN
Active switched line . . . . . . . : TRNLINE
Remote network identifier . . . . : *NETATR
Remote control point . . . . . . . : JUPITER
Exchange identifier . . . . . . . : 05636691
LAN remote adapter address . . . . : 400000000020
Device description . . . . . . . . : JUPITER
Category of device . . . . . . . . : *APPC
Remote location . . . . . . . . . : JUPITER
Local location . . . . . . . . . . : *NETATR
Remote network identifier . . . . : *NETATR
Attached controller . . . . . . . : JUPITER
Message queue . . . . . . . . . . : *CTLD
APPN-capable . . . . . . . . . . . : *YES
Network Attributes
Current system name . . . . . . . . . . . . . . : PLUTO
Pending system name . . . . . . . . . . . . . :
Local network ID . . . . . . . . . . . . . . . . : APPN
Local control point name . . . . . . . . . . . . : PLUTO
Default local location . . . . . . . . . . . . . : PLUTO
Default mode . . . . . . . . . . . . . . . . . . : BLANK
APPN node type . . . . . . . . . . . . . . . . . : *ENDNODE
Data compression . . . . . . . . . . . . . . . . : *NONE
Intermediate data compression . . . . . . . . . : *NONE
Maximum number of intermediate sessions . . . . : 200
Route addition resistance . . . . . . . . . . . : 128
Server network ID/control point name . . . . . . : APPN
Michael Crump
Saint-Gobain Containers
1509 S. Macedonia Ave.
Muncie, IN 47302
(765)741-7696
(765)741-7012 f
(800)428-8642
"The only thing necessary for the triumph of evil is for good men to do
nothing." Edmond Burke
jamesl@xxxxxxxxxx
m To:
midrange-l@xxxxxxxxxxxx
cc:
06/27/03 03:09 PM bcc:
Please respond to Subject: APPN for Dummies?
Midrange Systems
Technical
Discussion
Would anybody happen to be able to be able to point me to a step-by-step
procedure for setting up an APPN link between two of our systems, to run
some
DDM experiments? I've never done it before, and so far, nothing I've read
makes
much sense, and nothing I've tried works.
System 1 (40S,
V4R2):
SYSNAME/CPNAME/LCLOCNAME: JUPITER
Adapter address:
400000000020
System 2 (200, V3R2):
SYSNAME/CPNAME/LCLLOCNAME:
PLUTO
Adapter address: 400000000000
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
