Re: Non-TCP/IP based remote AS/400 connectivity solution

["Cynthia Kovarik" <ckovarik@xxxxxxxxxxxxx>]

Still here Chuck!  Thanks for your postings and everyone else's.  Now I know
there are a few options available!

Regards,
Cynthia
----- Original Message ----- 
From: "Chuck Lewis" <clewis@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, June 20, 2003 4:55 PM
Subject: RE: Non-TCP/IP based remote AS/400 connectivity solution


> Sounds like we are basically on the same page :-)
>
> So Cynthia; you still out there ? :-) What do you think ?
>
> Chuck
>
>
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Chris Bipes
> Sent: Friday, June 20, 2003 3:19 PM
> To: 'Midrange Systems Technical Discussion'
> Subject: RE: Non-TCP/IP based remote AS/400 connectivity solution
>
> Soo true! That's why we have the twinax protocol converter here.  Really
any
> twinax connected PC with remote control software can also work.  But if
your
> entire LAN is down you need a more direct connection to the PC such as
dial
> up.  In fact you can dial into your ECS modem running SDLC with the right
> card and software in the remote PC.  Really many choices are out there,
just
> choose the one that gives you the level of protection and access you
require
> or can afford.
>
>
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>