RE: lexmark ipds comm error

I don't have that model, but I do have T622 with IPDS option - working fine
on very large batches for us here -

Couple of things on your psfcfg I noticed, (one I could be off, but ours is
working - )
we do not have ipds passthru set up, or blank page(but you may want that
between jobs)
The other thing I see is you do not have auto recovery on.

On your device config, we have a image configuration of *IMGC06 (as I
understand this will help to print out
the data stream correctly - you could be getting a "weird" data stream
shutting down the printer)


Otherwise - are you sharing the printer with a network (NT/Netware/other),
that timer may be set too
low and is grabbing it from the Iseries/400.

Also "IF" you have a configurable model (ours has a very robust html
interface) - there are MANY settings
on the hardware itself for timing, and how to handle requests from
IP/IPDS/netware...ect...
check those out too (if you have it)

HTH
Mark


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Jim Franz
Sent: Wednesday, February 19, 2003 1:31 PM
To: MIDRANGE-L@xxxxxxxxxxxx
Subject: lexmark ipds comm error


I'm trying to go live with a app printing to Lexmark Optra T
with ipds card. Has worked fine for small batches. 1st
big print (350 pages) and got error. Cannot determine cause:
I suspect a timing issue but don't know if printer or 400?
I setup using the Lexmark instructions with the ipds card.
Cannot find msg id PQT3621 in Knowledge Base
tia
jim franz

PQT3621    Diagnostic              40
 02/19/03   13:36:41   QPQCCOMM       QSYS        075B     QPQRMGR      QSYS
 Message . . . . :   The session with device PQ ended abnormally.
 Cause . . . . . :   The session with device PQ at RMTLOCNAME 10.0.1.177,
using
PORT 9100, ended abnormally.  The error code is 20, which indicates one of
the following conditions: 20-39: A communications failure occurred. 40-59:
An internal failure occurred. Recovery  . . . :   For error codes 20-39,
check for problems in your network. After correcting the problem, start the
printer writer to begin processing files again. If the problem continues,
report it using the ANZPRB command. For error codes 40-59, start the printer
writer again. If the problem continues, report it using the ANZPRB command.
Technical description . . . . . . . . :   The internal message identifier
(ID) is CPINT004.

this is psf config
                                                            Sys
PSF configuration:   OPTRAPRT       Library:   QGPL

User resource library  . . . . . . . . . . . . . :   *JOBLIBL
IPDS pass through  . . . . . . . . . . . . . . . :   *YES
Activate release timer . . . . . . . . . . . . . :   *NORDYF
Release timer  . . . . . . . . . . . . . . . . . :   *SEC15
Restart timer  . . . . . . . . . . . . . . . . . :   *IMMED
APPC and TCP/IP retry count  . . . . . . . . . . :   15
Delay between APPC retries . . . . . . . . . . . :   90
Automatic session recovery . . . . . . . . . . . :   *NO
Acknowledgment frequency . . . . . . . . . . . . :   100
Blank page . . . . . . . . . . . . . . . . . . . :   *YES

this is device cfg

Device description . . . . . . . . :   PQ
Option . . . . . . . . . . . . . . :   *BASIC
Category of device . . . . . . . . :   *PRT

Device class . . . . . . . . . . . :   *LAN
Device type  . . . . . . . . . . . :   *IPDS
Device model . . . . . . . . . . . :   0
LAN attachment . . . . . . . . . . :   *IP
Advanced function printing . . . . :   *YES
Port number  . . . . . . . . . . . :   9100
Online at IPL  . . . . . . . . . . :   *YES
Font:
  Identifier . . . . . . . . . . . :   011
  Point size . . . . . . . . . . . :   *NONE
Form feed  . . . . . . . . . . . . :   *AUTOCUT
Separator drawer . . . . . . . . . :   *FILE
Separator program  . . . . . . . . :   *NONE
Printer error message  . . . . . . :   *INQ
Message queue  . . . . . . . . . . :   *CTLD
Current message queue  . . . . . . :   QSYSOPR
  Library  . . . . . . . . . . . . :     QSYS
Activation timer . . . . . . . . . :   *NOMAX
Image configuration  . . . . . . . :   *NONE
Maximum pending requests . . . . . :   6
Print while converting . . . . . . :   *YES
Form definition  . . . . . . . . . :   F1C10110
  Library  . . . . . . . . . . . . :     *LIBL
Character identifier . . . . . . . :   *SYSVAL
Remote location:
  Name or address  . . . . . . . . :   10.0.1.177
User-defined object  . . . . . . . :   OPTRAPRT
  Library  . . . . . . . . . . . . :     QGPL
  Object type  . . . . . . . . . . :     *PSFCFG
Data transform program . . . . . . :   *NONE
User-defined driver program  . . . :   *NONE
Dependent location name  . . . . . :   *NONE

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.