Re: lexmark ipds comm error -- MIDRANGE-L

I seem to remember that IPDS while it will use 9100 it works better on 
another port. 
Try going to 

http://www-1.ibm.com/support/docview.wss?uid=nas1a1c2e40159b7a0d786256acb005d3319

it says port  9600



_____________________
Kirk Goins
Systems Engineer, Manage Inc.
IBM Certified iSeries Solutions Expert
IBM Certified iSeries e-Business Infrastructure
IBM Certified Designing IBM e-business Solutions 
Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx      www.manageinc.com




"Jim Franz" <franz400@xxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
02/19/2003 11:31 AM
Please respond to Midrange Systems Technical Discussion

 
        To:     <MIDRANGE-L@xxxxxxxxxxxx>
        cc: 
        Subject:        lexmark ipds comm error


I'm trying to go live with a app printing to Lexmark Optra T 
with ipds card. Has worked fine for small batches. 1st 
big print (350 pages) and got error. Cannot determine cause:
I suspect a timing issue but don't know if printer or 400?
I setup using the Lexmark instructions with the ipds card. 
Cannot find msg id PQT3621 in Knowledge Base
tia
jim franz

PQT3621    Diagnostic              40 
 02/19/03   13:36:41   QPQCCOMM       QSYS        075B     QPQRMGR QSYS 
 Message . . . . :   The session with device PQ ended abnormally.  
 Cause . . . . . :   The session with device PQ at RMTLOCNAME 10.0.1.177, 
using 
PORT 9100, ended abnormally.  The error code is 20, which indicates one of 
 
the following conditions: 20-39: A communications failure occurred. 40-59: 
 
An internal failure occurred. Recovery  . . . :   For error codes 20-39,   
 
check for problems in your network. After correcting the problem, start 
the 
printer writer to begin processing files again. If the problem continues,  
 
report it using the ANZPRB command. For error codes 40-59, start the 
printer 
writer again. If the problem continues, report it using the ANZPRB 
command. 
Technical description . . . . . . . . :   The internal message identifier  
 
(ID) is CPINT004. 

this is psf config
                                                            Sys
PSF configuration:   OPTRAPRT       Library:   QGPL 
 
User resource library  . . . . . . . . . . . . . :   *JOBLIBL 
IPDS pass through  . . . . . . . . . . . . . . . :   *YES 
Activate release timer . . . . . . . . . . . . . :   *NORDYF 
Release timer  . . . . . . . . . . . . . . . . . :   *SEC15 
Restart timer  . . . . . . . . . . . . . . . . . :   *IMMED 
APPC and TCP/IP retry count  . . . . . . . . . . :   15 
Delay between APPC retries . . . . . . . . . . . :   90 
Automatic session recovery . . . . . . . . . . . :   *NO 
Acknowledgment frequency . . . . . . . . . . . . :   100 
Blank page . . . . . . . . . . . . . . . . . . . :   *YES 

this is device cfg

Device description . . . . . . . . :   PQ 
Option . . . . . . . . . . . . . . :   *BASIC 
Category of device . . . . . . . . :   *PRT 
 
Device class . . . . . . . . . . . :   *LAN 
Device type  . . . . . . . . . . . :   *IPDS 
Device model . . . . . . . . . . . :   0 
LAN attachment . . . . . . . . . . :   *IP 
Advanced function printing . . . . :   *YES 
Port number  . . . . . . . . . . . :   9100 
Online at IPL  . . . . . . . . . . :   *YES 
Font: 
  Identifier . . . . . . . . . . . :   011 
  Point size . . . . . . . . . . . :   *NONE 
Form feed  . . . . . . . . . . . . :   *AUTOCUT 
Separator drawer . . . . . . . . . :   *FILE 
Separator program  . . . . . . . . :   *NONE 
Printer error message  . . . . . . :   *INQ 
Message queue  . . . . . . . . . . :   *CTLD 
Current message queue  . . . . . . :   QSYSOPR 
  Library  . . . . . . . . . . . . :     QSYS 
Activation timer . . . . . . . . . :   *NOMAX 
Image configuration  . . . . . . . :   *NONE 
Maximum pending requests . . . . . :   6 
Print while converting . . . . . . :   *YES 
Form definition  . . . . . . . . . :   F1C10110
  Library  . . . . . . . . . . . . :     *LIBL 
Character identifier . . . . . . . :   *SYSVAL 
Remote location: 
  Name or address  . . . . . . . . :   10.0.1.177 
User-defined object  . . . . . . . :   OPTRAPRT 
  Library  . . . . . . . . . . . . :     QGPL 
  Object type  . . . . . . . . . . :     *PSFCFG 
Data transform program . . . . . . :   *NONE 
User-defined driver program  . . . :   *NONE 
Dependent location name  . . . . . :   *NONE 
  
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.