RE: Printer Communications Problem

Chris,

I'll have them check this. Forgot to mention that although everything was
working yesterday, this site dropped during the night and came RIGHT back up
(less than a minute) but obviously that reset all of the devices... 

Chuck 

-----Original Message-----
From: midrange-l-bounces+clewis=iquest.net@midrange.com
[mailto:midrange-l-bounces+clewis=iquest.net@midrange.com] On Behalf Of
Chris Bipes
Sent: Thursday, February 06, 2003 11:27 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Printer Communications Problem

The terminal and the printer are trying to use the same address.  Turn off
the terminal and reset the printer.  Bet it works!

Chris Bipes

-----Original Message-----
From: Chuck Lewis [mailto:clewis@iquest.net]

They do that and it comes up with
022 Unit Address Not Received.  At least THAT makes sense from what I am
seeing. But it gets weirder. We use twisted pair cabling. Well in this
office they only had 2 drops. And they had two terminals. So I did the old
"daisy chain" deal with one of the terminals. The Cat 5 patch cable comes
out of the wall jack and into the Balun in the twin-ax connector on the
printer. Then out of the other side of the twin-ax connector there is
another Balun and Cat 5 patch cable going to a Terminal. And the terminal IS
WORKING FINE.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.