Re: 4224 works on V4R4 and malfunctions on V5R1

Yeah, it seems that if the controllers are the same type the results should
be the same.  I'm wondering if it's the speed of the controller or if the
port on the brick isn't bad.

Jerry

----- Original Message -----
From: Philipp Rusch <Philipp.Rusch@rusch-edv.de>
To: Midrange Systems Technical Discussion <midrange-l@midrange.com>
Sent: Wednesday, January 22, 2003 12:32 PM
Subject: Re: 4224 works on V4R4 and malfunctions on V5R1


> Twinax has been improved in speed with newer controllers, they now do
> 2 Mbit instead of 1 MBit as before. That data area mentioned in other
posts
> controls stepping down of the speed back to the old level.
> I seem to remember that the old controllers were also only capable of
polling
> one port after the other, leaving only one port active at a time.
> The newer ones are able to poll several (two ?) ports simultanously,
> this causes troubles if your are using twinax-to-RJ45 multiplexers, for
instance.
> It's strange that this should happen, when both controllers in your
machines
> seem to be of same type.
>
> HTH, regards from Germany, Philipp Rusch
>
> Jerome Draper schrieb:
>
> > I have two 4224 *IPDS printers hooked up to a V4R2 machine and they work
> > fine.  I move them to a new V5R1 machine and they hardly print at all.
> > Funny scratching by the print head and sporadic print lines but never
> > anything close to a full report.  For example, they won't print a
standard
> > report from QPRINT.  Put them back ont he V4R2 machine and all is fine.
> >
> > Anyone seen this?  PTF?
> >
> > TIA,
> >
> > Jerry
> >
> > Jerome Draper, Trilobyte Software Systems, since 1976
> > Network and Connectivity Specialist -- Mac's, LAN's, PC's, and iSeries
> > Representing Synapse, Nlynx, Perle, CLI, Intermate and Others .....
> > (415) 457-3431 - (415) 258-1658fax - http://www.trilosoft.com
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo.cgi/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo.cgi/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>