Re: 4224 works on V4R4 and malfunctions on V5R1

None of the below.

Rob, The printer was not "moved" except that the twinax was moved from the
brick on the V4R2 AS400 to the brick on the V5R1 AS400.  The printer was not
physically moved.  Could it be the brick on the V5R1 AS400 (yes, could be).
Paper was not unloaded/reloaded nor was paper thickness changed.

NeilP,  I'll try your suggestion of moving it to a new port on the brick
(perhaps it's the brick).

bdietz:  No the devices were not migrated and we tried the delete/recreate
of the device to no avail.

Jerry


From: <rob@dekko.com>
To: Midrange Systems Technical Discussion <midrange-l@midrange.com>
Sent: Tuesday, January 21, 2003 11:54 AM
Subject: Re: 4224 works on V4R4 and malfunctions on V5R1

> This sounds like a physical defect rather than a software issue.
>
> Did you physically move the printer to attach it to this new machine?
> Hopefully no physical damage was done.
>
> Did you unload/reload paper to attach it to this new machine?
> Maybe you adjusted your paper thickness wrong.
>
> Rob Berendt

From: <neilp@dpslink.com>
To: Midrange Systems Technical Discussion <midrange-l@midrange.com>
Cc: Midrange Systems Technical Discussion <midrange-l@midrange.com>;
<midrange-l-bounces@midrange.com>
Sent: Tuesday, January 21, 2003 12:36 PM
Subject: Re: 4224 works on V4R4 and malfunctions on V5R1

> I noticed similar weird behaviour when I moved a 4224 from a V4R5 model
> 170 to a new V5R2 model 270 on the weekend.  It would drop contact with
> the system quite often.  I solved the problem by moving it to a different
> twinax port (I manually altered the device description port #, didn't let
> auto-config do anything, and it's worked fine ever since).
>
> ...Neil

From: <bdietz@3x.com>
To: Midrange Systems Technical Discussion <midrange-l@midrange.com>
Sent: Tuesday, January 21, 2003 2:09 PM
Subject: Re: 4224 works on V4R4 and malfunctions on V5R1
>
> I'll make an assumption....you migrated the device description from the
> "old" system to the new one.  This should work. delete thed devd and let
> auto config create a new one.  I seem to remember some apar or some such
> document somewhere.
>
> -------------------------
>  Bryan Dietz
> 3X Corporation
> 614-410-9205
>
> ======================
> I have two 4224 *IPDS printers hooked up to a V4R2 machine and they work
> fine.  I move them to a new V5R1 machine and they hardly print at all.
> Funny scratching by the print head and sporadic print lines but never
> anything close to a full report.  For example, they won't print a standard
> report from QPRINT.  Put them back ont he V4R2 machine and all is fine.
>
> Anyone seen this?  PTF?