RE: Start netfinity server after IPL

Rick,

So many of the startup routines proceed asynchronously (like subsystem
auto/pre-start jobs) that it is entirely possible that supporting tasks
are not active prior to the VRYCFG command.  If you can ensure that the
VRYCFG is the last line of QSTRUP, then you could precede it with a
DLYJOB.  Or have qstrup submit a job to a job queue with a brief delay
followed by the VRYCFG.

Regards,
Andy Nolen-Parkhouse

> bounces@midrange.com] On Behalf Of Rick Klopfer
> Subject: Start netfinity server after IPL
> 
> We are trying to figure out a way to startup automatically our internal
> Netfinity Server after an IPL.  In QSTRUP, we have placed the VRYCFG
> *ON of this *NWS at the end.....but it will not vary-on.  Once the IPL
> completes, we have to manually repeat this command to get it to boot.
> 
> Any suggestions??
> 
> Rick--