RE: V4R5: Client Access isn't working after scratch reload

Try netstat *cnn and look for port 449, as-srvmap, as well as port 8476,
as-signon.  They need to be in listening state before you can connect.

Two.  On you PC go to the properties of you AS400 connection.  Change the
"Where to look up port" to standard and see if you can get in that way.  If
the port server mapper is not running, which it sounds like, this will
bypass the port query and use standard CAE ports, provided you did not
change the ports.

If the server mapper is not running, give us a holler and we will attempt to
debug that.  Most likely the server profile does not have access to the
database.

Christopher K. Bipes      mailto:Chris.Bipes@Cross-Check.com
Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.          http://www.cross-check.com
6119 State Farm Drive     Phone: 707 586-0551 x 1102
Rohnert Park CA  94928    Fax: 707 586-1884


-----Original Message-----
From: tomh@simas.com [mailto:tomh@simas.com]

Everything is working as before, with one exception - we cannot get a signon
session thru Client Access.  I can get one with telnet, and also with the
Mochasoft emulator.

I look at the History Log, and it shows 3 errors at the same time:
CWBCO1003 - Winsock error, function connect returned 10061
CWBCO1006 - Unable to connect to server mapper (port 449) on system
CWBCO1000 - Communication error while validating ...