|
Chris, Should I take your comments as suggestions and not answers to any of my 7 questions? Thx, Dare ----- Original Message ----- From: "Chris Bipes" <chris.bipes@cross-check.com> To: <midrange-l@midrange.com> Sent: Thursday, September 05, 2002 1:08 PM Subject: RE: Clarification on DISK CONFIGURATION > You need more capacity. The 510 cannot RAID the load source therefore you > must mirror to stay protected. Every other drive is RAID'd. I would look > at replacing the 6606 and 6607 drives with 6713's This will keep your arm > count the same and increase your capacity. You should be able to find used > 6713's drives. Ask your business partner for them. BCC also can also help > you find these or their equivalent drives. Your 9337 are also old > technology and probably very expensive to keep on maintenance. Hopefully by > the end of the year I will upgrade my 720 to 820 and replace the SPD tower > brought forward from our 510. When I do, I will have several SPD cards and > 6607 drives for sale. I can sell the 16 6607 drive, Drive expansion box, > and SPD controller card at that time. This may be several months down the > road though. > > ( A happy BCC customer 949 453-7600 ) > > Christopher K. Bipes mailto:Chris.Bipes@Cross-Check.com > Operations & Network Mgr mailto:Chris_Bipes@Yahoo.com > CrossCheck, Inc. http://www.cross-check.com > 6119 State Farm Drive Phone: 707 586-0551 x 1102 > Rohnert Park CA 94928 Fax: 707 586-1884 > > > -----Original Message----- > From: Dare [mailto:oludare@ix.netcom.com] > > Hi guys, > > I'm on OS400 V4R5M0, AS/400 9406-510 2144, with current CUM. > > Need some clarification, education AND/OR suggestion(s) on my system disk > configuration. > > I have 2 ASP (ASP 1 is Mirrored and Raided) with a total of 173.1 Gig and > 90% threshold. > My system ASP is 57.19Gig with 87.4692% USED. I think the only unit > MIRRORED in this ASP is UNIT 1. > ASP 2 is 115.92Gig with 82.49% USED. I think this ASP is totally RAIDED. > The protection column for both ASPs shows all "DEVICE PARITY" except for > Unit 1 in ASP1 that shows "CONTROLLER". > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-L-request@midrange.com > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. >
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.