Re: SNA (Yes SNA) setup - will it autoconfig?

Walden,
We had problems attempting to connect two 820s via ethernet to on 3494. One
gotcha is that the 3494 is 10M NIC, not 100!! I did not do initial ethernet
setup, but I could not get it to work, plus it would have required a dedicated
NIC in each 820 because our network is pure 100M.  We went with serial
connections from the modem/serial card (9447?) to the 3494. Those connections
are used for BRMS to communicate to the 3494 tape library. For the SNA
communications between the 820s for synchronization, we use SNA over IP through
Gigabit NICs that are also used for our Domino replication.
Bob Larkin



"Walden H. Leverich" wrote:

> Two iSeries (actually AS/400s) that need to talk SNA to eachother (actually
> to a 3494 tape library). It's been so long since I setup a SNA network I
> don't remember it. On V4R5 if I create the lines and vary them on will the
> two systems auto config? I already have them talking via opti-connect if
> that changes anything.
>
> -Walden
>
> PS. Is it really true that the 5494 won't talk IP to an AS/400 until V5R2?
>
> ------------
> Walden H Leverich III
> President
> Tech Software
> (516) 627-3800 x11
> (208) 692-3308 eFax
> WaldenL@TechSoftInc.com
> http://www.TechSoftInc.com
>
> Quiquid latine dictum sit altum viditur.
> (Whatever is said in Latin seems profound.)
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.