Re: Cursor C1 already open

["Peter Colpaert" <Peter.Colpaert@xxxxxxxxxxxx>]

Mark,

We've been using CAE 5.1 for several months already, and connect to
different systems ranging from V3R2 to V5R1, with no problems whatsoever.

Just my two eurocents.

Peter Colpaert
Application Developer

Honda Europe NV
Langerbruggestraat 104
B-9000 GENT
Belgium
Peter.Colpaert@honda-eu.com
Tel: +32 9 2501 334
Fax: +32 9 2501 231
----------
Yoda of Borg are we: Futile is resistance. Assimilate you, we will.
----------




"Mark Waterbury" <mark.s.waterbury@worldnet.att.net>@midrange.com on 29/08/2002 
17:02:57
Please respond to midrange-l@midrange.com
Sent by:  midrange-l-admin@midrange.com

To:   <midrange-l@midrange.com>

cc:

Subject:  Re: Cursor C1 already open


Hello, Adam:

I am not 100% certain, but I think this is "working as designed"...

If I understand your situation correctly, you upgraded your PC
to CAE 5.1, but the AS/400 to which you were connecting was
at OS/400 V4R4.  I do not think this is a "supported configuration".

In other words, I can understand how you may be able to continue
to use an older version of CA/CAE with a newer version of OS/400, but not
vice versa.

Perhaps someone from IBM can shed more light on this?

Regards,

Mark

----- Original Message -----
From: "Adam Lang" <aalang@rutgersinsurance.com>
To: <midrange-l@midrange.com>
Sent: Thursday, August 29, 2002 8:22 AM
Subject: Re: Cursor C1 already open


> I blew out CAE 5.1 and installed 4.4 and it is working now.
>
> That's upsetting.
>
> any ideas where I should report something like this?
>
> Adam Lang
> Systems Engineer
> Rutgers Casualty Insurance Company
> http://www.rutgersinsurance.com
> ----- Original Message -----
> From: "Adam Lang" <aalang@rutgersinsurance.com>
> To: <midrange-l@midrange.com>
> Sent: Wednesday, August 28, 2002 1:43 PM
> Subject: Re: Cursor C1 already open
>
>
> > I was doing the explicit close in both my attempts.  I even set the
> > recordset to nothing after the close.
> >
> > It only works if I set the connection object to nothing also and
reconnect
> > on every loop.
> >
> > I am reinstalling CAE 4.4 and seeing if it works.
> >
> > Adam Lang
> > Systems Engineer
> > Rutgers Casualty Insurance Company
> > http://www.rutgersinsurance.com
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.






______________________________________________________________________
The information contained in this communication is confidential and may be
legally privileged. It is intended solely for the use of the individual or
the entity to whom it is addressed and others authorised to receive it. If
you have received it by mistake, please let the sender know by e-mail reply
and delete it from your system.
If you are not the intended recipient you are hereby notified that any
disclosure, copying, distribution or taking any action in reliance of the
contents of this information is strictly prohibited and may be unlawful.
Honda Europe NV is neither liable for the proper and complete transmission
of the information contained in this communication nor for any delay in its
receipt.