RE: Question on IBM 4230 printer setup

Yes, I only tried printing source listings as a test.  Also program reports
without printer overrides.

Any ideas of where else I could search?  Could it be a hardware problem
that needs some little "tweeking"?  I only received a users manual with it
when purchased.
Thanks for your effort.


At 12:44 PM 8/22/02 -0500, you wrote:
>Hmmm... Don't know what to tell you. Are you printing "regular ole reports"
>?
>
>-----Original Message-----
>From: midrange-l-admin@midrange.com
>[mailto:midrange-l-admin@midrange.com]On Behalf Of Ruth
>Sent: Thursday, August 22, 2002 11:01 AM
>To: midrange-l@midrange.com
>Subject: RE: Question on IBM 4230 printer setup
>
>
>It's a 4230-4I3 printer, and its device type configures as IPDS.
>The queued report has a print quality of *STD, which I can change to
>FASTDRAFT.  But I don't want to have to change every report.  I tried to
>change the  IMGCFG parameter of the printer definition, but those I tried
>didn't change the print speed.
>
>At 10:35 AM 8/22/02 -0500, you wrote:
> >What model 4230 did you get ? There is a little tag on the front, bottom
> >right hand side (not on the "beige" area, but on the dark brown area) that
> >says   Type 4230-??? where ??? is the model number.
> >
> >Not sure if this would effect that or not but the 101's configure on the
> >AS/400 as a 4214 and the 102's as *IPDS...
> >
> >Chuck
> >
> >-----Original Message-----
> >From: midrange-l-admin@midrange.com
> >[mailto:midrange-l-admin@midrange.com]On Behalf Of Ruth
> >Sent: Thursday, August 22, 2002 10:11 AM
> >To: midrange-l@midrange.com
> >Subject: Question on IBM 4230 printer setup
> >
> >
> >We bought some used IBM 4230 printers. I changed the printer panel to
> >print in fast draft mode, and let autoconfig create the printer
> >definition, but every time anything prints on it, it is near-letter
> >quality. It seems the printer definition on AS400 overrides the
> >printers panel setup. Can anyone tell me how to get these printers to
> >actually print faster than near-letter quality?
> >We are on V4R5M0 of operating system. Thanks in advance. Ruth
> >
> >Ruthie
> >
> >_______________________________________________
> >This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> >To post a message email: MIDRANGE-L@midrange.com
> >To subscribe, unsubscribe, or change list options,
> >visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> >or email: MIDRANGE-L-request@midrange.com
> >Before posting, please take a moment to review the archives
> >at http://archive.midrange.com/midrange-l.
>
>Ruthie
>_______________________________________________
>This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
>To post a message email: MIDRANGE-L@midrange.com
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>or email: MIDRANGE-L-request@midrange.com
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/midrange-l.
>
>
>_______________________________________________
>This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
>To post a message email: MIDRANGE-L@midrange.com
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>or email: MIDRANGE-L-request@midrange.com
>Before posting, please take a moment to review the archives
>at http://archive.midrange.com/midrange-l.

Ruthie