RE: Problem with SSL

Scott Wrote,
>Did you try accessing it by domain name instead of ip adrress?

I have my server instance configured to use both the local certificate
and the verisign certificate. That should still work right?

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com] On Behalf Of Scott Klement
Sent: Tuesday, July 16, 2002 4:56 PM
To: midrange-l@midrange.com
Subject: RE: Problem with SSL


I assume you're trying to connect from your LAN?  192.168.0.6 is a
"private" IP address that can only be used from your LAN.

So, I'll continue, assuming that you're on the LAN.

The "Page cannot be displayed" is not a useful error message.   You need
to find out what's actually going wrong...

You might try connecting with a different web browser than Internet
Explorer, one which will give you a useful error message instead of the
useless "Page cannot be displayed" message.   It might give you a better
answer.

I've also found that the "openssl" program that comes as a part of the
openssl library is a very useful tool for troubleshooting SSL problems.
For example, you could type:

      openssl s_client -connect 192.168.0.6:2010

and it would print info about the certificates being exchanged, and
error
messages, etc.  You can do other options such as -CAfile tand -showcerts
to find out different information about the connection, and try
different
things to try to troubleshoot it.


On Tue, 16 Jul 2002, Justin Houchin wrote:

> Yes run of them is port 2010 the other is port 2001. So I tried
> https://192.168.0.6:2010. Page cannot be displayed. What do I try
next?
>
> -----Original Message-----
> From: midrange-l-admin@midrange.com
> [mailto:midrange-l-admin@midrange.com] On Behalf Of Scott Klement
> Sent: Tuesday, July 16, 2002 1:58 PM
> To: midrange-l@midrange.com
> Subject: RE: Problem with SSL
>
>
>
> On Tue, 16 Jul 2002, Justin Houchin wrote:
> [SNIP]
> > SSL is running on the *admin server, Here is the netstat....
> > But I don't see port 2010, no messages in QSYSOPR, or Job logs
> >
> [SNIP]
> >   *                *          as-admi >  000:00:36  Listen
> >   *                *          as-admi >  000:00:36  Listen
>
> Well, you have two things that appear to be called "Admin" (shown
above)
> One of them might be on port 2010... did you check? Press F14 from
that
> screen to see the port numbers.
>
>

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.