× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. July 2002

Re: s10 upgrade to v5r1

At 11:19 AM 7/2/02, Jim Franz wrote:

I wouldn't swear for your configuration, but about 1 hour ago, I completed
that same operation on our mod 170.

Deleted the server *NWSD first, pulled the two cards, performed normal IPL,
used SST Hardware manager to delete the two cards.  Worked fine.   (in my
case I also had to reconfigure the ethernet card, that worked fine too.)



>Looking for assurance upgrading S10-2119 from V4R5 to V5r1.
>System has #2850 FSIOP I know needs to be removed. Was
>intended for Firewall but never implemented. My ethernet card
>is on a seperate MFIOP - CMB02
>Can I just power down, remove 2850 and 285A, and re-ipl? Do I
>need to get a "filler" card to fill the space? if yes then feature#?
>
>The install book for a Netfinity Server in V4 does not say much
>about removing the feature.

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.