Re: Printing To Different Source Drawer

[Vernon Hamberg <vhamberg@xxxxxxxxx>]

Lots of printers can redirect the default drawer to one or the other. Find
someone who knows how to check the menus at the printer and see what's
going on.

At 03:39 PM 5/6/02 -0500, you wrote:
>Thanks, that worked.  Sorta.  When it gets to the actual printer now, it
>wants you to press select.  When this is done, it prints from drawer 2.   Is
>there a way to trigger the printer to automatically print from drawer 2?
>Before it was automatically printing from drawer 1 now it stops and waits
>for answer.  All other reports are printed on normal 8 1/2 x 11 and this is
>the only one that will print 8 1/2 x 14 (for now).
>To answer Pat's question:  This printer is a lexmark (not sure of model) and
>is connected through a *LAN connection.  As far as the device description.
>Basic printer connection, *LAN device class, Lexilink attachment, 3812
>device type, Mfg type is *lexoptras, drawer two is *Legal.  Anything else?
>Stephanie
>
>
>----- Original Message -----
>From: Ingvaldson, Scott <SIngvaldson@guidemail.com>
>To: <midrange-l@midrange.com>
>Sent: Monday, May 06, 2002 8:19 AM
>Subject: Re: Printing To Different Source Drawer