Re: Printing To Different Source Drawer

["Stephanie Mutone" <stephanie.mutone@xxxxxxxxx>]

Thanks, that worked.  Sorta.  When it gets to the actual printer now, it
wants you to press select.  When this is done, it prints from drawer 2.   Is
there a way to trigger the printer to automatically print from drawer 2?
Before it was automatically printing from drawer 1 now it stops and waits
for answer.  All other reports are printed on normal 8 1/2 x 11 and this is
the only one that will print 8 1/2 x 14 (for now).
To answer Pat's question:  This printer is a lexmark (not sure of model) and
is connected through a *LAN connection.  As far as the device description.
Basic printer connection, *LAN device class, Lexilink attachment, 3812
device type, Mfg type is *lexoptras, drawer two is *Legal.  Anything else?
Stephanie


----- Original Message -----
From: Ingvaldson, Scott <SIngvaldson@guidemail.com>
To: <midrange-l@midrange.com>
Sent: Monday, May 06, 2002 8:19 AM
Subject: Re: Printing To Different Source Drawer


> Stephanie -
>
> You will probably need to modify a Workstation Customization Object to
force
> the output to drawer two.  Instructions for this are in the Tech Support
> Knowledgebase at http://www-912.ibm.com/supporthome.nsf/document/10000057
> The documents you will need are 8331900 - Forcing Output to Print from
> Drawer 2 Using Host Print Transform (HPT) and 8692422 - Instructions for
> Modifying a Workstation Customizing Object (WSCST).
>
> Scott Ingvaldson
> AS/400 System Administrator
> GuideOne Insurance Group
> SIngvaldson@guidemail.com
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>